Bank Deposit Bags & Drop Safe Bags — Tamper-Evident TamperTite® Security Bags

Federal Reserve-approved tamper-evident security bags engineered for financial institutions, retail operations, and cash-handling businesses. TamperTite® deposit bags feature MaxLock™ Freon-proof adhesive closure, sequential serial numbering with matching tear-off receipts, and scannable barcodes for complete audit trail accountability. Our reinforced film construction withstands up to 50 lbs capacity while maintaining tamper-evidence integrity across extreme temperature manipulation attempts.

Available configurations include standard deposit bags for night deposits and Federal Reserve transfers, drop safe register bags for shift close-outs and cash register control, and heavy-duty 7 mil coin bags for high-volume coin transport. All bags manufactured with clear or opaque film options, permanent sequential numbering, and fracture tape that reveals tampering when exposed to heat, cold (including Freon/dry ice), or chemical solvents.

Browse TamperTite® security bags below or explore our security features. Questions about Federal Reserve compliance or custom security solutions? Call 800-569-1266 (M-F 8:30-5 EST).

Why TamperTite® Exceeds Competitive Security Standards

MaxLock™ Freon-Proof Adhesive Technology

TamperTite® bags utilize proprietary MaxLock™ adhesive formulation that maintains tamper-evidence under extreme temperature manipulation:

• Freon resistance: Adhesive fractures and changes appearance when exposed to refrigerants (Freon, R-134a, dry ice)
• Heat resistance: Tampering attempts using heat guns, hair dryers, or steam cause immediate visible tape damage
• Chemical resistance: Solvents (acetone, alcohol, petroleum distillates) trigger adhesive breakdown and color change
• Saliva detection: Moisture-based opening attempts leave permanent evidence of manipulation
• Temperature range: Maintains integrity from -40°F to 140°F normal handling conditions

Common theft methodologies defeated by MaxLock™ technology: freezing bags to release adhesive (Freon spray method), heating to soften adhesive for peel-back, solvent application to dissolve bonding agents, moisture introduction to weaken seal. All attempts create immediately visible tampering indicators impossible to conceal or reverse.

Federal Reserve Compliance Certification

TamperTite® bags meet and exceed Federal Reserve System specifications for currency transport:

• Fed Regulation compliance: Approved for Federal Reserve Bank deposits and inter-bank transfers
• Processing throughput: Bag construction optimized for high-speed Federal Reserve processing equipment
• Weight capacity certification: Tested to Fed specifications for currency bundle weights without seal failure
• Slippage prevention: Film coefficient of friction prevents bag-to-bag slipping during bulk handling
• Sequential integrity: Numbering system meets Fed requirements for audit trail documentation

Federal Reserve approval ensures compatibility with armored car services, bank vault operations, and inter-bank cash transfer protocols. Bags accepted by all major armored transport providers including Brinks, Garda, Loomis, and Dunbar.

Security Feature Engineering

Sequential Serial Numbering System

Every TamperTite® bag features unique sequential numbering for complete chain-of-custody documentation:

• Bag serial number: Large format number printed prominently on bag face (7-10 digit sequential)
• Matching barcode: Code 128 or Code 39 barcode encoding serial number for scanner compatibility
• Tear-off receipt: Perforated receipt stub with matching serial number for depositor records
• Duplicate receipts: Some configurations include dual receipts for depositor and processor
• Numbering location: Positioned for visibility during vault processing and audit review

Sequential numbering creates verifiable audit trail: depositor retains receipt, armored car scans barcode at pickup, bank processor matches serial to deposit records, discrepancies immediately flagged through number sequence gaps.

Barcode Scanning Integration

TamperTite® bags engineered for automated processing systems:

• Barcode format: Code 128 standard (high-density linear barcode)
• Scan angle tolerance: Readable from multiple angles for high-speed processing
• Print quality: High-contrast black ink on white background ensures 99%+ first-read accuracy
• Position standardization: Barcode location consistent across bag sizes for automated scanners
• Human-readable backup: Serial number printed adjacent to barcode for manual verification

Compatible with standard POS scanners, handheld inventory scanners, and fixed-position processing line scanners. Integration with vault management software, armored car tracking systems, and bank reconciliation platforms.

Writeable Identification Panels

Designated writing surfaces for deposit documentation:

• White block panels: Chemically treated surface accepts pen, pencil, marker without smudging
• Panel location: Positioned on bag face for visibility without obscuring contents (clear bags)
• Information fields: Pre-printed fields for date, amount, depositor, route, etc. (optional)
• Ink retention: Writing surface resists moisture and handling abrasion

Product Line Specifications

Standard Deposit Bags - Night Deposits & Federal Reserve Transfers

General-purpose tamper-evident bags for financial institution deposits:

Construction specifications:

• Film thickness: 3-4 mil low-density polyethylene (LDPE) or linear low-density polyethylene (LLDPE)
• Film options: Clear (transparent) or opaque (privacy) configurations
• Closure type: MaxLock™ adhesive flap with permanent seal
• Capacity range: 5 lbs to 25 lbs depending on size
• Size range: 9" x 12" through 12" x 20" standard configurations

Security features:

• Fracture tape: tamper-evident tape changes appearance when manipulated
• Sequential numbering: unique serial number per bag
• Barcode: Code 128 format for scanner compatibility
• Tear-off receipt: perforated stub with matching serial number
• White block: writeable panel for deposit information

Applications: Night drop deposits, Federal Reserve shipments, inter-bank transfers, armored car transport, vault-to-vault transfers, branch-to-central processing movement.

Drop Safe Register Bags - Cash Register Control & Shift Close-Outs

Smaller format bags engineered for point-of-sale cash management:

Construction specifications:

• Film thickness: 2.5-3 mil LDPE optimized for register drawer cash volumes
• Film options: Clear or opaque based on internal security protocols
• Closure type: MaxLock™ adhesive with captive flap design preventing premature seal failure
• Capacity range: 2 lbs to 10 lbs (typical register drawer excess cash)
• Size range: 6" x 9" through 9" x 12" for register compatibility

Captive flap engineering:

Proprietary flap design distributes seal stress across adhesive width preventing sudden breakage. Standard single-fold flaps concentrate stress at fold line causing premature seal failure when bags are dropped or handled roughly. Captive flap construction reinforces stress points, maintaining seal integrity through:

• Drop impact from counter height (3-4 feet)
• Rough handling during safe loading
• Weight distribution from uneven cash/coin loads
• Temperature fluctuations in safe environments

Applications: Cash register close-outs, shift change cash control, drop safe deposits, till overages, manager's fund transfers, petty cash reconciliation, same-store transfers.

Operational workflow: Cashier counts excess register cash, records amount on white block, seals bag with MaxLock™ closure, retains tear-off receipt, drops bag into safe. Manager retrieves bags, scans barcodes, reconciles against receipts, transports to bank/vault. Tamper-evidence protects against internal theft between register and vault.

Heavy-Duty Coin Bags - High-Volume Coin Transport

Reinforced bags engineered for coin weight and handling abuse:

Construction specifications:

• Film thickness: 7 mil LDPE ("stuff tough" reinforced formula)
• Handle configuration: Single strap handle reinforced at stress points
• Closure type: MaxLock™ adhesive with extended 3" flap for secure seal
• Capacity: Up to 50 lbs rolled coin without bag failure
• Size: 12" x 19" standard (accommodates Federal Reserve coin box dimensions)

Film engineering:

7 mil gauge provides 75% greater puncture resistance versus standard 4 mil deposit bags. Critical for coin applications where:

• Sharp coin roll edges stress film during transport
• Weight concentration creates pressure points
• Rough handling (dropping, dragging) is common
• Multiple transfers increase cumulative stress

Handle reinforcement:

Strap handles heat-sealed with 2" reinforcement patches at attachment points. Standard handles tear at stress concentration where strap meets bag body. Reinforcement distributes load across larger film area preventing catastrophic failure when carrying 40-50 lb coin loads.

Applications: Federal Reserve coin deposits, armored car coin pickup, vault-to-branch coin distribution, retail coin room consolidation, casino coin transport, amusement facility coin handling.

Material Science and Durability Engineering

Film Selection: LDPE vs. LLDPE

Low-Density Polyethylene (LDPE):

• High flexibility and conformability to irregular contents (bundled cash)
• Excellent tear propagation resistance (bag doesn't catastrophically fail from small puncture)
• Superior optical clarity for clear bag applications
• Better low-temperature performance (remains flexible in freezer/vault environments)
• Used in: Standard deposit bags, coin bags where clarity and flexibility critical

Linear Low-Density Polyethylene (LLDPE):

• Higher tensile strength for equivalent gauge (thinner film achieves same strength)
• Superior puncture resistance from sharp objects
• Better heat resistance (withstands higher storage temperatures)
• More cost-effective for heavy-duty applications
• Used in: High-volume applications where cost optimization important

Clear vs. Opaque Film Selection Criteria

Clear film advantages:

• Receiving verification: Bank processors visually verify contents without opening
• Instant reconciliation: Armored car personnel confirm currency/coin match documentation
• Theft deterrent: Tampered contents immediately visible during chain of custody
• Processing speed: Federal Reserve facilities process clear bags 15-20% faster

Opaque film advantages:

• Privacy protection: Contents hidden from external observation during transport
• Robbery deterrent: Concealed contents reduce attractiveness as theft target
• Interior use preferred: Many financial institutions mandate opaque bags for branch-to-vault
• Regulatory compliance: Some jurisdictions require content privacy during public transit

Hybrid solution: Clear bags for Federal Reserve deposits (required by many Fed facilities), opaque bags for retail-to-bank transport where robbery risk elevated.

Competitive Advantages vs. Market Alternatives

TamperTite® vs. Generic Deposit Bags

Security Feature	TamperTite®	Generic Bags
Freon-proof adhesive	MaxLock™ fractures when frozen	Standard adhesive releases cleanly
Heat resistance	Tape damages visibly	Often reopens without evidence
Federal Reserve approval	Certified for Fed deposits	May not meet Fed standards
Film gauge consistency	±5% tolerance testing	Variable (cost-cutting)
Barcode quality	99%+ first-read rate	Variable print quality
Pricing	Premium (10-15% higher)	Lower initial cost
Total cost of ownership	Lower (reduces theft losses)	Higher (theft risk)

Security ROI Analysis

TamperTite® premium pricing justified through risk mitigation:

• Internal theft prevention: Single incident of employee theft (average $1,200 retail, $8,500 financial institution) exceeds annual cost difference for tamper-evident bags
• Dispute resolution: Tamper-evidence eliminates costly investigations when deposit discrepancies occur - clear evidence determines liability
• Insurance compliance: Many commercial policies require Federal Reserve-approved security bags - premium reduction often offsets bag cost increase
• Armored car acceptance: Major carriers require tamper-evident features - generic bags rejected requiring emergency replacement

Application Engineering by Industry Vertical

Financial Institutions - Banks & Credit Unions

Teller operations:

• Standard deposit bags (9" x 12", 12" x 16") for customer night deposits
• Top-bottom split bags for cash/check separation during processing
• Coin bags (12" x 19") for rolled coin vault transfers
• Strap bags for single-denomination currency bundles (100-note straps)

Vault operations:

• Large capacity bags (12" x 20") for Federal Reserve shipments
• Color-coded bags for denomination sorting (optional custom printing)
• Sequential numbering integrated with vault management software
• Barcode scanning for automated inventory reconciliation

Retail Operations - Multi-Location Businesses

Point-of-sale cash management:

• Drop safe bags (6" x 9", 9" x 12") for register close-outs at each location
• Store-specific numbering sequences for multi-location tracking
• Manager verification through tear-off receipt matching
• Armored car pickup consolidated from multiple locations

Cash-in-transit security:

• Opaque bags for manager transport from store to bank (robbery deterrent)
• Serial number tracking through GPS-enabled courier apps
• Tamper-evidence protects against courier theft allegations

Casino & Gaming Operations

Table game drops:

• Heavy-duty bags for high-volume chip/currency drops
• Sequential numbering matches table number and shift
• Clear bags required by many gaming commissions for audit visibility
• Multiple daily drops necessitate high bag consumption volumes

Slot machine coin collection:

• Reinforced coin bags (50 lb capacity) for hopper drops
• Barcode integration with slot accounting systems
• Color-coding by denomination ($1 vs. $0.25 machines)

Restaurants & Hospitality

Daily deposit management:

• Small deposit bags (6" x 9") for typical daily receipts ($500-$2,000)
• Manager-to-bank transport during daylight hours
• Barcode scanning at bank drop-off for instant confirmation
• Reduced cash-on-premises insurance requirements

Ordering Specifications and Inventory Management

Standard Package Quantities

• Deposit bags: 100 bags per box, 1000 bags per case (10 boxes)
• Drop safe bags: 100 bags per box, 1000 bags per case
• Coin bags: 100 bags per box, 500 bags per case (due to larger size)

Inventory Consumption Calculation

Financial institutions:

• Night deposits: 20-50 bags/day (100-250 bags/week) = 1,000-3,000 bags/month
• Federal Reserve transfers: 5-20 bags/week = 250-1,000 bags/month
• Typical order: 3,000-5,000 bags quarterly

Retail operations:

• Drop safe usage: 1-3 bags/location/day = 30-90 bags/location/month
• Multi-location (10 stores): 300-900 bags/month
• Typical order: 1,000-2,000 bags quarterly

Custom Printing and Branding

TamperTite® bags available with custom printing:

• Minimum order quantities: 5,000-10,000 bags depending on complexity
• Print options: Company logo, branch identification, custom numbering sequences, color-coding
• Lead time: 3-4 weeks from artwork approval
• Setup costs: One-time plate charges (waived on repeat orders)

Common customizations: Bank logo with branch number, retail chain name with store code, casino name with table/shift designations, custom sequential number formats (alphanumeric prefixes).

Regulatory Compliance and Certification

Federal Reserve System Standards

TamperTite® bags certified for compliance with Federal Reserve requirements:

• Operating Circular 4: Cash deposit packaging specifications
• Processing throughput standards: High-speed equipment compatibility
• Weight capacity testing: Verified performance with currency bundle loads
• Slippage coefficient: Film friction prevents handling accidents

Armored Car Service Requirements

Accepted by all major armored car services:

• Brinks, Incorporated: Approved vendor status
• Garda CL: Meets service specifications
• Loomis Armored: Certified compatible
• Dunbar Armored: Accepted for transport

Insurance and Bonding Compliance

Many commercial insurance policies require tamper-evident security:

• Fidelity bonds: Tamper-evident bags reduce premiums
• Cash-in-transit insurance: Required by many carriers
• Business liability: Demonstrates reasonable security precautions

Technical Support and Custom Solutions

Our security packaging specialists provide comprehensive support:

• Bag selection for specific applications and volumes
• Custom numbering sequence development for multi-location operations
• Integration with vault management and tracking software
• Custom printing artwork and proofing services
• Volume pricing for contract manufacturing
• Armored car service coordination and approval verification

Contact security products specialists: 800-569-1266 (M-F 8:30-5 EST)

Request samples: Available for testing with your current deposit procedures before committing to full case purchases.

Deposit Bag & Drop Safe Bag FAQs